Environmental Protection - WAGNER WOOD&METAL EXTRA Mode D'emploi

Corner&Reach spray attachment
3. Place the ventilating hose (Fig.1A, 15) on the valve cover and on the nipple at the gun
body.
4. Push the nozzle seal (Fig. 1B, 4) over the needle (2); the groove (slot) should point
towards you.
5. Insert all the parts of the extension into each other and keep in the packaging (Fig. 1,
pos. 3, 5, 6, 9).
6. Place the container seal from below on the ascending tube and slide it over the collar,
while turning the container seal slightly.
7. Insert the ascending tube with container seal in the gun body.
Pos. Designation
3 Needle, front section
4 Nozzle seal
5/6 Paint/air pipe
Australia (AUS) version order no. in brackets
8 Union nut
9 Air cap
12 Container seal
13 Feed tube
14 Container 600 ml with cover
15,16,17 Ventilating hose, Valve cover, Diaphragm
18 Viscosity test cup
The CLICK&PAINT SYSTEM with additional spray attachments and accessories off ers
the right tool for each work.
Further information about the WAGNER range of products for renovating is available
under www.wagner-group.com

Environmental protection

The appliance and accessories should be recycled in an environmentally
friendly way. Do not dispose of the appliance with household waste. Support
environmental protection by taking the appliance to a local collection point or
obtain information from a specialist retailer.
Important Note regarding Product Liability!
Due to an EC ordinance in eff ect since 01.01.1990, the manufacturer is liable for his
product only if all parts originate from or were approved by the manufacturer and the
devices are assembled and operated correctly. The use of other accessories and spare
parts can partially or completely invalidate the liability.
Spare Parts List (Fig. 1+6)
GB
Order No.
0417 919
0417 706
0417 920
AUS (0417 926)
2362 873
0417 363
2323 039
2362 876
0414 906
2304 027
0209 058
9