Table des Matières
Publicité
Brief operation guide
Daily use
Format change
Volume and speaker adjust
Source selection
Stand
Picture in Picture (P-IN-P)
Further information
- Switch on the BeoVision Avant 32 DVD by choosing the source e.g. TV, DVD,
VTAPE etc.
•
- Switch off the TV with
m
p
- Use
and
to change channel up and down. The buttons 0-9 can also be used.
- Change the format with LIST (until FORMAT) + 1-3.
Format 1: Change between 4:3 / 14:9 / 15:9 with
Format 2: 16:9 letterbox format, move the picture up and down with
Format 3: Real 16:9.
- Format optimize with LIST (until FORMAT) + GO.
- Raise and lower volume with
- Change between speaker modes with LIST (until SPEAKER) + 1-5.
- Use the source buttons, can also be found with LIST (until "SOURCE") + GO.
- Turn the TV with LIST (until STAND) +
- LIST (until P-IN-P) + "SOURCE". Change between sources with 0. Change the
position of the small picture with LIST (until P-IN-P) + coloured arrow buttons.
- Please refer to the Guide and the Reference book for further information regarding
operation of the BeoVision Avant 32 DVD.
. Hold for 3 seconds to switch the entire system into stand-by.
r
u
and
. Press both to mute and demute the sound.
l
n
or
.
Brief operation guide
m
p
and
.
m
and
2.1
p
.
Publicité
Table des Matières
