Cooking Tables - T-Fal Ultimate EZ Clean Deep Fryer Mode D'emploi

Masquer les pouces Voir aussi pour Ultimate EZ Clean Deep Fryer:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Eng
Frying is complete when:
• the timer sounds, indicating the cooking time has elapsed
• the food is of the desired colour and texture.
To stop the signal, press the touchpad
• Remove the lid.
Allow excess oil to drain by hooking the basket on the
elevated support on the inner bowl.
• Serve.
To switch off, press
Unplug the appliance and let it cool for about 3 hours.
• For filtering and draining the oil or fat, see the chapter on
Maintenance.

Cooking tables

The cooking times are a guide only. They could vary depending on quantity, taste,
electricity supply etc...
For best results and to prevent overflowing,use the traditional French method of frying
hand made French fries
- first cycle at 320 °F/160 °C
- second cycle at 374 °F/190 °C
For safety and for the crispiest results, dry food items thoroughly before frying, especially
frozen foods and freshly made fries.
Large pieces of chicken or large fries need a longer cooking time.
Set the temperature thermostat according to the table below, or follow the instructions
on food packaging.
Cooking tip: To prevent food from sticking together, do not use the basket when cooking
battered foods or doughnuts.
8
.
until display goes off.
!
Do not touch the
fryer when it is in
use as it will be
extremely hot and
can cause severe
burns. Steam
coming from the
filter is also
extremely hot.
!
The timer signals
the end of cooking
but does not switch
off the appliance.

Publicité

Table des Matières
loading

Table des Matières