T-Fal Ultimate EZ Clean Deep Fryer Mode D'emploi page 12

Eng
• To re-use the oil, remove the container with care.
Unscrew the oil box cap and empty the oil in the fryer bowl.
• For the solid shortening, remove the lid from the
container. Turn the container over and press it to loosen
the shortening. Cut shortening into pieces and melt in a
separate pan.
Once melted, pour shortening into the bowl.
• Insert the empty container in the fryer, with the lid and
cap. Place the Oil box control lever on the Fry position.
Change oil: your fryer is equipped with an oil
change indicator.
• After 10 uses, the light will flashes to indicate that the oil
should be changed in the near future. At 15 uses, the light
will remain on. Oil should be changed regularly for best
frying results and to prevent overflowing.
• Change the oil/fat and press the Reset button on the panel
until the light goes off.
10
!
Never put the
Oil box in the
microwave oven.
!
Do not pour used
oil in the sink.