emerio Smart Fryer AF-123543 Mode D'emploi page 6

AF-123543
PARTS DESCRIPTION
1. Air inlet
2. Heating light
3. Power light
4. Timer knob
5. Temperature control knob
6. Frying grill
7. Silicone case
8. Basket
9. Basket handle
10. Air outlet
BEFORE USE
First read all instructions before use and retain the manual for later reference. Only plug this appliance into an
earthed socket. Before first use, remove the packing materials. Clean the basket and frying grill. (See
"CLEANING AND MAINTENANCE") Wipe inside and outside of the appliance with a soft cloth. Make sure that
the electrical parts remain dry. This appliance heats food at all directions and most of the ingredients do not
need any oil.
NOTE: Always use the frying grill with the silicone cases covered. They will help to stabilize the frying grill in
the basket during cooking.
USE
1. Place the appliance on a dry, stable and heat-resistant surface.
2. Since the appliance becomes hot during use, make sure that it is not too close to other objects.
3. Pull out the basket from the appliance by the basket handle. Put the frying grill into the basket.
4. Place the ingredients into the basket. (Do not exceed the MAX level indicated inside the basket.) Slide the
basket into the appliance. Make sure they are placed correctly and closed completely. Otherwise the
appliance will not work. Caution: Do not touch the basket during use or after use in short time as it gets
very hot. Only hold the basket by the handle.
5. Connect the power plug to a suitable outlet.
6. Set the temperature control knob to the required temperature setting, which is suitable for what you are
frying. Consult the temperature table.
7. Turn the timer knob to choose the appropriate frying time and the appliance is switched on.
8. The power light illuminates when the appliance is switched on. The heating light comes on and goes out
from time to time during the hot air frying process. This indicates that the heating element is switched on
and off to maintain the set temperature.
- 5 -
EN