Correction Of Malfunctions - WAGNER W 180 P Traduction Du Mode D'emploi Original

GB
7, arrow). Briefly switch on the spray gun.
The spray gun can only operate satisfactorily if it is cleaned and preserved
i
after each use.
Accessories W 180 P (not included in scope of delivery)
Designation
Paint container with cover
Needle-jet nozzle
Flexible nozzle extension with atomiser
For spraying ceilings, resting objects or hard-to-reach areas e.g. radiators
Pos Name
1 Suction tube
2 Paint container with cover
3 Nozzle 0,8 mm
4 Locking nut
5 Valve
6 Pump housing
7 Piston spring
8 Piston
9 Nozzle spanner
10 Viscosity measuring cup

Correction of Malfunctions

Problem
Spray gun buzzes
and does not work
Spray gun does not
suck in
16
Spare Parts List (Illus. 9)
Cause
•
Piston stuck
•
Defective drive
•
No valve in the pump
•
Suction tube loose in the
conical bore
•
Venting hole in pump housing
clogged
•
Intake hole (fitting) in
pumphousing logged
•
Viscosity of spray material too
high
Order No.
0413 305
0413 909
0046 903
0413 310
0209 042
0413 202
0033 028
0198 207
0199 327
0209 058
Remedy
➞ Disassemble pump and
clean with thinner
➞ Please contact Wagner
Service
➞ Insert valve
➞ Adjust suction tube
➞ Clean
➞ Clean
➞ Thin accordingly
W 180 P
Order No.
0413 909
0209 045
0046 675