Technical Data - WAGNER W 180 P Traduction Du Mode D'emploi Original

W 180 P
Max. delivery rate:
Max. viscosity:
Max. pressure spikes: 150 bar
Power source:
Power consumption: 110 W
Round spray nozzle: 0.8 mm
Sound pressure level:*
Uncertainty K:
Oscillation level:*
Uncertainty K:
* Measured in accordance with EN 60745-1
Materials to be used:
Paints and varnishes containing solvents, acrylic enamel paints, water-soluble varnishes,
glazes, polishes, wood preservatives, disinfectants, plant protectives, saturants, as well as
oils and other watery liquids.
The following spray substances are not suitable for use:
Dispersion and latex paints, materials containing strong abrasives, glazes with coarse
particles, strippers and caustic solutions, silicate paints. Use of these spray materials can
lead to increased wear or corrosion damage in the pump area, which are not covered by
the WAGNER-Guarantee.
Functional Description of the Spray Gun
The spray gun sucks in spray materials. The airless atomisation results when the spray material
is pumped at high pressure through the swirl system and the nozzle bore.

Technical Data

270 g/min
(runout time) 80 sec. Double insulation:
230 V, 50 hz
86 dB(A)
4 dB
10.5 m/s²
1.5 m/s²
Container capacity: 800 ml
Pump:
Pump cylinder:
Piston:
Weight:
Sound pressure
output:*
Uncertainty K:
GB
Replaceable
Special steel
Hard-chrome-plated
special steel Ø 5 mm
1.5 kg
99 dB(A)
4 dB
13