Print; Switching The Device To Standby Mode - Reiner ChronoDater Série Mode D'emploi

ChronoDater 920/922/925

1.8. Print

Print Fig. B

NOTICE
Damage of the print plate or print wheels.
Do not print on staples, paperclips or similar hard objects.
f
The trigger table
correct positioning of the print media.
The print action is activated by tripping the trip switch
or light pressure on the trigger table
The maximum batch size is 2 mm.
Depending on text plate used, up to 5 copies (NCR) are possible.
Insert paper to be printed on.
f
Print is performed.

1.9. Switching the Device to Standby Mode

Standby mode
Push [OFF] for 5 seconds.
f
The ChronoDater is in Standby mode.
4
and the housing flap
4
.
2 5
have marks attached that indicate
6
with the print medium
GB
35