Connecting Power Supply; Inserting Chipcard; Selecting Language; Display Contrast - Reiner ChronoDater Série Mode D'emploi

ChronoDater 920/922/925

1.4. Connecting Power Supply

Connecting power supply
Use only genuine REINER accessories.
WARNING
Danger of fire from incorrect mains voltage.
Check that the local mains voltage matches the voltage indicated on the mains adapter.
f
NOTICE
Incorrect order when connection to the mains may cause damage.
Observe the following order.
Connect the mains adapter plug to the
f
Plug the mains adapter into the socket.
f
The device starts adjustment of the print wheels.

1.5. Inserting Chipcard

Inserting Chipcard  Fig.
The Chipcard function can be activated in the menu
(see "Setting Chipcard Function", page 37).
Insert Chipcard
f
printed on the card
The ChronoDater is ready for work.

1.6. Selecting Language

See "Selecting Language", page 36.
f

1.7. Display Contrast

See "Display Contrast", page 41.
f
34
Fig.
C

+
A E
11
into the Chipcard reader in the direction of the arrow
7
.
9
ChronoDater connection socket.