Package Contents - Weinmann JOYCE Mode D'emploi

6 Troubleshooting
Problem Cause
Painful
pressure Mask is too
on the tight.
face.
Mask is too
loose.
Mask does
Draught in
not fit.
the eyes.
High
therapy
pressure.
Mask not
adjusted
correctly.
Mask
cushion is
damaged.
Therapy
pressure is
Hose system
not
is leaking.
reached.
Air is escap-
ing from
pressure
meas-
urement
ports.
14
Troubleshooting
Solution
Loosen headgear
slightly.
Adjust position of
forehead support.
Tighten headgear
slightly.
Adjust position of
forehead support.
Use a different size of
mask; contact your
distributor.
Use hard mask
cushion (for pressures
up to 40 hPa).
Available from your
distributor.
Adjust headgear.
Adjust position of
forehead support.
Replace mask
cushion.
Check push-fit
connector and fit of
hose sleeves.
Cover pressure
measurement ports
with cap (included in
package).

7 Package contents

Note
All masks are supplied fully assembled
(including JOYCE
®
JOYCE models
Article
®
JOYCE ‚ Size S
®
JOYCE ‚ Size M
®
JOYCE ‚ Size L
®
JOYCE 40 hPa‚ Size S
®
JOYCE 40 hPa‚ Size M
®
JOYCE 40 hPa‚ Size L
®
JOYCE NV models
Article
®
JOYCE NV, Size S
®
JOYCE NV, Size M
®
JOYCE NV, Size L
®
JOYCE NV 40 hPa‚ Size S
®
JOYCE NV 40 hPa‚ Size M
®
JOYCE NV 40 hPa‚ Size L
Replacement parts
Article
Ball-and-socket joint set:
retaining ring, elbow, rotating
sleeve
Ball-and-socket joint set NV:
retaining ring NV, elbow NV,
rotating sleeve NV
Forehead support:
Forehead cushion, forehead
support coarse adjustment
component, forehead support
fine adjustment component
Forehead cushion
®
strap headgear).
Article no.
WM 26110
WM 26120
WM 26130
WM 26111
WM 26121
WM 26131
Article no.
WM 26160
WM 26170
WM 26180
WM 26161
WM 26171
WM 26181
Article no.
WM 26206
WM 26207
WM 26201
WM 26200