Sending A Fax - Canon imageRUNNER 2545i Guide De L'utilisateur

Sending a Fax

This section describes the basic operation procedure for sending a fax.
1
Display the Send Screen
4
Press
screen of the Send and Fax functions.
• If the machine is in the Sleep mode, press
(Power).
• Enter your ID and password or insert the
control card if the screen prompts you to do so.
(See "How to Log in to the Machine," on p. 4-2.)
• If the screen shown below appears, enter your
user name and password and specify the login
destination ➞ press [Log In].
IMPORTANT
• The Fax function is available only when the optional Super G3 Fax Board-AG1 is
attached to the machine.
• Even when the above option is attached, using the Fax function can be restricted by
the settings of Authorized Send. (See Chapter 4, "Customizing Settings," in the
Remote UI Guide.)
4-10

Sending a Fax

(SEND) to display the top
2
Place Your Originals
Place your originals in the feeder or on
the platen glass.
• Close the feeder/platen cover after placing
your originals on the platen glass.