Grounding Instructions; Machine Components - Tennant V-WD-24P Manuel D'utilisation

EN

GROUNDING INSTRUCTIONS

This appliance must be grounded. If it should
malfunction or breakdown, grounding provi-
des a path of least resistance for electric cur-
rent to reduce the risk of electric shock. This
appliance is equipped with a cord having an
equipment-grounding conductor and groun-
ding plug. The plug must be inserted into an
appropriate outlet that is properly installed
and grounded in accordance with all local co-
des and ordinances.
WARNING - Improper connection of
the equipment-grounding conductor
can result in a risk of electric shock.
person if you are in doubt as to whether the
outlet is properly grounded. Do not modify the
the outlet, have a proper outlet installed by a
This appliance is for use on a nominal 120
volt circuit and has a grounding attachment
plug that looks like the plug illustrated above.
Make sure that the appliance is connected to
plug. No adaptor should be used with this ap-
pliance.
WARNING - The replacement or re-
pair of damaged wiring should only be
engineer from the original distributor or autho-
rized service agent.
6 TENNANT V-WD-24P

MACHINE COMPONENTS

B - Switched receptacle
C - Latches
D - Inlet
H - Power cord
I - Tank drain hose
J - Camlock coupling (for pump drain hose)
thread - for pump drain hose)
R - Vacuum hose
T - Cord restraint hook
U - Wand Handle Clip
W - Two-piece wand
X - Hose nozzle
6 - Crevice tool
7 - Round brush
8 - Tool adaptor
10 - Squeegee attachment
11 - Pump discharge hose (10 m)