Screensaver; Basic Use Of The Blueface Thermostat; Adjusting The Temperature - Airzone ZBS BLUEFACE Mode D'emploi

SCREENSAVER

The screensaver activates after about 10 seconds of inactivity, displaying the following information:
Weather
information
Current room
temperature
Operation mode
Time and Date. This information can be edited from the user settings menu.
Weather Information. The screen will only display the weather information after setting the location of the Airzone ZBS
Cloud Webserver on the Airzonecloud app.
Current Zone. Displays the current zone.
Current Room Temperature. Displays the current (measured) temperature where the thermostat is located.
Relative Humidity. Displays the humidity of the zone.
Operation Mode. Displays the current operation mode of the system.
On/Off. Switches On/Off the zone.
Touch the screen of the interface to go from the screensaver to the home screen.

BASIC USE OF THE BLUEFACE THERMOSTAT

Adjusting the temperature

On/Off. Press to switch on/off the zone.
Temperature Control. Displays the current set point temperature. Adjust the set point temperature on the Blueface
Thermostat following the next instructions:
Press the set point temperature to switch between heating and cooling set points. Press + or - to manually adjust by
increments of 0.5 C/1 F.
The permitted temperature range is:
Heating mode: 15 C/59 F 29 C/84 F.
Cooling mode: 18 C/64 F 30 C/86 F.
There is a minimum difference allowed between heating and cooling set point temperatures. The system will prevent
setting a temperature within the protection range.
Time and date
Current zone
Relative humidity
On/Off
EN
EN
FR
IT
PT
DE
7