Think Thermostat; Main Screen Display - Airzone ZBS BLUEFACE Mode D'emploi

THINK THERMOSTAT

MAIN SCREEN DISPLAY

Operation Mode
Zone/ Current Room
Temperature/ Relative
humidity
Setting parameters
Zone demand
Local ventilation
Home screen/ Heating
or Cooling Set Point
temperature
Navigate through the Think Thermostat by pressing the side buttons on the control bars.
Operation Mode. Displays the operation mode selected from the Main thermostat: Cool, Heat, Auto and Emergency Heat
(depending on the installation). Direct expansion systems include Dry mode.
User Mode. Displays the User Mode selected from the Main thermostat: Eco, Vacation, Stop, Comfort, Unoccupied or Night
Time.
Airflow. Depending on the installation, displays the Airflow Control selected from the Main thermostat: Silence, Standard or
Power.
Zone. Displays the current zone.
Current Room Temperature. Displays the current temperature in the room where the Think thermostat is located.
Note: The range of measured room temperature goes from 10
limits, the temperature will be displayed as < 10
Relative humidity. Indicates the relative humidity of the zone.
Control Bar. Adjusts (by pressing or by sliding) all the parameters controlled by the Think Thermostat.
Note: Press once to adjust the set point temperature by a single degree. Slide to adjust the set point temperature in larger
steps.
Setting Parameters. Press to access to Mode, User mode, Airflow control, Local ventilation, Timer, Heating stages and
Information parameters.
Current Set Point. Displays the temperature set point from the Think Thermostat control bar.
Zone Demand. This icon will be displayed if the zone is calling for demand.
Local Ventilation. Displays if the local ventilation is activated or deactivated.
Timer. Automatically switches off the zone after 30, 60 or 90 minutes.
On/Off. Turns On and Off the zone where the thermostat is located.
Airzone. Button used to confirm, return to home screen and to switch between the heating set point and cooling set point.
0 C/50 0 F to 35
0 C/50 0 F or > 35 5 C/90 0 F.
User Mode
Airflow
Control bar
Current Set Point
Timer
On/Off
5 C/90 0 F, if the room temperature is out of these
EN
EN
FR
IT
PT
DE
13