Switching On The Robot - Amibot Spirit PREMIUM Manuel D'utilisation

EN
Operation
Plug in the auto-empty station using the power cable. Place the
home base on a level surface 6 cm from the wall. Keep a distance of
at least 1.5 m in front of the base and 0.5 m at either side. Place the
dust bag in its compartment in the auto-empty station.
Once cleaning is complete, the robot goes to auto-empty at its auto-
empty station and then charges from the front.
NOTE:
• When your AMIBOT Spirit Premium robot is on its auto-empty station, make
sure that your robot is switched on and the station's power light is on.
• The auto-empty station must be placed on a smooth, flat surface, otherwise
the robot may not empty effectively.

Switching on the robot

Press the power button for 3
seconds. The robot is ready to
be charged.
14