Charging The Robot - Amibot vision Manuel D'utilisation

EN
Operation
Assembling the side brushes
Clip the side brushes to the designated area.

Charging the robot

Assembling the home base
Plug in the home base using the power cable.
Place the home base on a level surface next to a wall, at a right angle
to the floor. Keep a distance of at least 2 m in front of the base and
1 m at either side.
NOTE: When your AMIBOT Vision robot is on its home base, make sure that your
robot is switched on and the home base power light is on.
1m
16
1m
2m