Stopping The Robot; Switching Off The Robot - Amibot Swift CONNECT Manuel D'utilisation

EN
Operating the robot
WALL mode
With WALL mode, the robot goes along the walls, skirting boards
and furniture to clean as close to them as possible thanks to its side
brushes.

Stopping the robot

If the battery is low, the robot stops. If you want to stop the robot
manually, press the power button.
NOTE: When the robot is not cleaning, you are recommended to let it charge.

Switching off the robot

Press the power button for 7 seconds. The robot beeps once after
pressing the button, a second time after 5 seconds and after the
third beep, the robot switches off.
9