Charging The Robot - Amibot Flex Laser Manuel D'utilisation

EN
Operation

Charging the robot

Figure 1
There are two ways to charge the battery:
• Using the home base (Figure 1).
• Using the power adapter (Figure 2).
NOTE:
• The robot must be switched on while it is being charged.
• Do not place a mirror or other highly reflective object within a distance of at
least 15 cm from the home base.
• When the robot's battery is completely flat, the AUTO indicator light slowly
flashes red. While charging, the indicator light slowly flashes blue. When fully
charged, the AUTO indicator light is steady blue.
• If the battery is weak while the robot is cleaning, it automatically returns to its
home base. The home base must therefore be switched on.
• If the robot is not used for a long period of time, you are recommended to
fully charge the battery, switch off the robot and store it in a cool, dry place.
Figure 2
12