Operating The Robot; Charging The Robot - Amibot Animal Manuel D'utilisation

EN

Operating the robot

Charging the robot

Assembling the home base
1 m 1 m
2 m
Plug in the home base using the power cable.
Place it on a level surface next to a wall, perpendicular to the floor.
Keep a distance of 2m minimum in front of the base and 1m at ei-
ther side.
NOTE: When the AMIBOT robot is on its home base, make sure that it is switched on
and the home base power light is on.
Switching the robot on
Turn the power switch to ON. "I" is ON and "O" is OFF. The robot is
ready to be charged.
8