Brandt MAP-5511 Manuel D'utilisation page 29

11. WHAT TO DO IF...
• The two dots (:) flash and the machine
does nothing. The bread dough may
need more time to rise.
• The result is not as good as it should
be e.g, the bread did not rise or has
not been baked. Ensure that the correct
quantities of ingredients have been
used, that the yeast is not off and the
amounts stated in the recipe have been
used.
• The bread has not been baked
consistently. The next time ensure that
the kneading blade is well fitted onto the
driving shaft.
• The bread is black. The machine is
faulty; contact your nearest Technical
Service Centre for repair.
• Flour fallen into the inside of the
machine. Switch off the Machine:
Unplug the machine and leave to cool.
Do not attempt to clean the resistance
coil Send the appliance to an authorised
Technical Service Centre
• "E:01" appears on the screen. The
breadmaker temperature is too high.
Open the cover and remove the bread
mould. The message will disappear
when the appliance cools down
• Any of the following messages appear
on screen "E:02", "E:03", "E:04", "E:05"
or "E:08". Your breadmaker is faulty.
Contact your nearest Technical Service
Centre for repair.
28