General Safety Instructions - Rothenberger Industrial RO-LASERMETER 35 Notice D'utilisation

1500000597,98_Anleitung_fbg_D,GB,F,I,H,SLO.qxd:PRINT

General Safety Instructions

- Check that the device is in good condition each time you wish to use it. If in
doubt contact a qualified person or the service centre listed on the back cover of this
manual.
- Never use a damaged device.
- Repairs my only be carried out at an authorised, qualified personnel. Ensure
that only original replacement parts are used. This will not invalidate the
guarantee and ensures continued safe operation of the measuring device.
- Never apply voltage to the device, this can cause damage to the device.
- Do not operate the device in explosive or flammable atmospheres.
- Use the device with care, avoid jolts or other impacts. Never drop the device.
- Do not dismantle the deviceas this can cause damage.
- Store the appliance in a dry place and away from dust.
- Keep the device clear from water, dirt and dust.
- Turn the device off and allow it to reach room temperature before exposing it to
variations in
temperature. Otherwise condensation can form, which under certain circumstances
can damage the device.
- The device may only be used in accordance with this operating manual. Any other
use can impair the device's safety features and lead to injuries.
- This appliance is not intended for use by persons (including children) with
reduced physical,
sensory or mental capabilities, or lack of experience and knowledge. Children
should be supervised to ensure that they do not play with the appliance.
Safety instructions for the laser
Caution!
- Never point the laser at yourself, people or animals. This is a class 2 laser product
according to EN 60825-1. It can blind or dazzle people.
- A laser is not a toy and must be kept away from children.
Misuse can lead to irreversible visual impairment.
- Any adjustment which leads to an increase of the laser power is forbidden. The
manufacturer cannot accept any responsibility caused by failure to follow these safety
instructions.
CAUTION:
Laser light
Do not stare into the beam!
Laser class 2
According to EN60825-1:2007
Max. output < 1 mW
Wavelength 630 - 670 nm
17
18.02.2015 12:28 Uhr Seite 17