Spare Parts - Wolf Garten UV 34 E Mode D'emploi

Adjust operating depth
Only with motor switched off and non-mowing aeriating roller. The
operating depth must be adjusted to the corresponding grass and
ground conditions.
Move operating lever towards front
Increasing the working depth (cutters towards the
L
ground) (1)
–
Turn the handwheel "Working Depth Adjustment" to the
right
Reducing the working depth
–
Turn the handwheel "Working Depth Adjustment" to the left.
(One turn = 1.5 mm working depth)
3
Aeriating test:
Pull operating lever up again
M
Start tool
Push operating lever slowly forward
Move tool slowly into operating direction
On hearing stones being hit or blocking of the motor im-
mediately switch off tool
Turn rotating handle 1–2 rotations towards the left
(2).
Start aeriating test again
When used regularly the aeriating depth may be adjusted ac-
cording to the wear of the blade (+).
Maintenance
General
1
Attention! Rotary cutter blade
Before all maintenance and cleaning work:
pull out the power plug.
Do not touch running blades.

Spare parts

Item number
3632 060
3568 081
Supplied by your dealer .
14
(1).
K
L
(2)
(2)
K
(1)
K
L
Order description
TK-VV
UV-EV
Recommended working heights
well kept lawns with stone-free, soft ground
–
Set tool exactly to ground height
stony, untidy lawns
–
Set tool to ground height
–
Increase working height if stones are thrown up
unkempt, extremely mossy lawns
–
Start with a high working height
–
Do not overload appliance (reduce working height if motor
blocks)
–
Cut vertically and crossways several times
–
Re-saw with WOLF >>Loretta<< lawn seeds
Scarifying
1. Depress button M (1) and hold.
M
2. Lift up bar (2) and release button
K
3. Place lever (1) slowly into forward position.
4. Switch-off motor: Release bar
1
Important:
Place the cable firmly off the lawn or on the already cut side
of the lawn when starting to mow.
3
Turning (UV 32 EV / UV 34 E)
The cable relief holder enables you to move the cable from one
side of the handle frame to the other. Thus you ensure that the
cable always trails on the ride of the lawn already cut – and not
in front of the machine
Cleaning
Clean the unit thoroughly with a brush after each use.
Do not spray with water.
Store unit in a dry room.
3
We recommend
Allow a WOLF-service centre to check the unit in the autumn.
Product information
Grass catcher
Replacement blade (15 x)
M
(1).
M
(2).
N
.
G