Series 905-Pc; Safety Instructions - Alcad 905-ZA Série Manuel D'installation Et Programmation

SERIES 905 - ZA
Modular amplification equipment, selective and programmable, for
terrestrial digital and analogue TV. Each ZA-411 module consists of two
independent filters which can be programmed as monochannel or
multichannel.
Each processor module, ZA-431 (UHF) or ZA-331(VHF), consists of a
superselective monochannel filter (FOS).
1.

SAFETY INSTRUCTIONS

Make all the RF and power connections before connecting the equipment to
the electric mains.
To comply with safety standards, the electrical installation must be protected
with a differential circuit breaker.
Do not remove the covers of
the equipment while it is still
connected to the mains supply.
All repairs must be performed
by authorised
personnel. Internal manipula-
tion of the equipment annuls
all guarantees.
+ 45 °C
- 10 °C
SERIE 905-ZA
Fig. 1 - Earthing the equipment
technical
Fig. 2 - Do not manipulate while connected
Ensure that the equipment is properly ventilated. If it is to
be installed in a cabinet, use the cabinet CP-126 (code
9050124). Any
temperature range (-10°C to +45°C) may be damaged
irretrievably. Do not block or cover the ventilation slots of
the power supply unit or of the cabinet.
Fig. 3 - Temperature range
230 V
equipment working
ENG - 29
beyond its