Memorisation And Data Retrieval In The Ps Programmer; Function Screen - Alcad 905-ZA Série Manuel D'installation Et Programmation

44 - ENG
You must keep the PS programmer pointed at the PA amplifier until the
message Read... disappears from the screen.
Note: In reading data, the level adjustment values are not obtained.
To consult the data received, select the appropriate function with the
keys. You will be able to see the data on the screen of the PS programmer.
9. MEMORISATION AND DATA RETRIEVAL IN THE PS
PROGRAMMER
Programming of the ZA modules can be done by memorising all the data
beforehand, then retrieving them from the PS programmer. It is not
necessary to be in front of the equipment to memorise data from the
headend. Later, in the installation, the data can be copied to each module
from the programmer.
To memorise the data of a module, select the ZA model (ZA-411, ZA-331
or ZA-431) and use the function Memorise F 8. With the
select the number of the module to be memorised (M1 to M10). Press the T
key and any data you have previously entered in the PS programmer for this
module will be memorised. You will be able to enter the name and the
channel or channels of the module with the
memorise the name of the module, press the T key again and the message
Saving will appear on the programmer screen.
To retrieve the data of a module previously saved to the memory of the PS
programmer, select the ZA model (ZA-411, ZA-331 or ZA-431) and use
the function Recover F 7. With the
the module (M1 to M10) whose data you wish to retrieve. Press the T key
and the retrieved data will be sent to the selected module. The message
Copy... will appear on the programmer screen.

FUNCTION SCREEN

F 8
MEMORISE
F 7
RECOVER
To exit from the function Memorise or Recover, press the ESC key.
If you try to use the Memorise or Recover functions without having
previously selected the ZA model on which you wish these instructions to act,
you will see the message No Model selected and you will not be able
to access the memory menu.
Installation and programming manual
Memorise ZA-431 Saves the data programmed in
M1:
ZA-431 Restores the data in memory 1
Recover
M1:
Tab. 9 – Memory functions
, ,
and keys, select the number of
DESCRIPTION
memory 1 for the selected model.
for the selected model.
and
and keys,
and keys. To