Alcad 905-ZA Série Manuel D'installation Et Programmation page 37

36 - ENG
Processor:
FUNC. SCREEN
Programming
Processor
ZA-431
Mode:
Digital
Channel
B/G CCIR C21
Frequency
474.00 MHz
Bandwidth
8 MHz
Offset
+1/6 MHz
Automatic level
Adjust levels
Table channels
B/G CCIR
F COPY Copy ...
COPY
F READ Read ...
READ
Installation and programming manual
on/off
adjust
+ 1dB
Tab. 4 - Processor functions
DESCRIPTION
Activates the programming mode.
Selects the processor UHF or VHF.
Selects the mode of the channel to process,
analogue or digital.
Selects the input channel to process
in the desired standard.
Selects the frequency of the video carrier in
analogue mode or the central frequency
in digital mode.
Selects the adjustment of the channel
bandwidth.
Selects the adjustment of the input/output el
offset in digital mode.
Automatic adjustment of the levels of all the
installed processors.
Manual adjustment of the level of the
processor.
Tables of channels according to standard or
frequency mode.
Transmits the data to a module.
Reads all the data of a module.