Alcad 905-ZA Série Manuel D'installation Et Programmation page 42

The message Channel F1 B/G CCIR C21:26 on the screen of the
PS programmer means that you can configure the filter of the module as a
multichannel filter; you do this by entering the initial and the final channels.
To edit the second datum (final channel or frequency), press the
same key can be used to toggle between the initial and the final data.
The message Frequency F1 471.25MHz on the screen of the PS
programmer screen means that you can enter the video frequency of the
channel and configure the module filter as a monochannel filter.
Note: Do not enter decimal points since these will be inserted automatically
in the correct position as you type in the data.
The message Frequency F1 471.25:495.25MHz on the screen of
the PS programmer means that you can enter the video frequency of the
initial channel and of the final channel and configure the module filter as a
multichannel filter.
To edit the second datum (channel or frequency of the final channel), press
.
the key on the programmer and use the
decrease the width of the filter from monochannel to hexachannel. The
on the programmer can be used to filter between the initial and the final
data.
The maximum number of channels for a multichannel configuration is 6.
CAUTION, For multichannel filters in which one channel is analogue and the
other channels are digital, analogue mode must be selected.
In digital mode:
The message Channel F1 B/G CCIR C21 on the screen of the PS
programmer means that you can configure the module filter as a
monochannel filter.
The message Channel F1 B/G CCIR C21:26 on the screen of the
PS programmer means that you can configure the module filter as a
multichannel filter, by entering the initial channel and the final channel.
To edit the second datum (final channel or frequency), press the
same key can be used to toggle between the initial and the final data.
The message Frequency
programmer screen means that you can enter the central frequency of the
channel and configure the module filter as a monochannel filter.
SERIE 905-ZA
474MHz on the screen of the PS
F1
and arrows to increase or
ENG - 41
.
key. The
.
key
.
key. The