Series 905-To; Safety Instructions - Alcad 905-TO Série Manuel D'installation Et Programmation

SERIES 905 - TO
Modular receiver equipment of digital TV via terrestrial, or COFDM-PAL
transmodulators. The equipment converts DVB-T digital TV programs into
terrestrial band, analogue TV channels.
1.

SAFETY INSTRUCTIONS

Make all IF, RF and supply connections before connecting the units to the
electric mains.
To meet the safety norms, the
electrical installation must be
protected by a differential circuit-
breaker.
Fig. 1 - Device ground connection
Do not remove the unit covers
while connected to the mains. All
repairs must be performed by
authorised technical service staff.
Internal manipulation of the units
cancels all warranties.
Fig. 2 - Do not manipulate while
+ 45 °C
-- 10 °C
Fig. 3 - Range of temperatures
Consult your supplier if you have any doubts concerning the installation,
operation or safety requirements of the units.
Serie 905-TO
connected
Make sure that
the unit is properly ventilated. For installation in a chest, use
a CV-001 chest with built-in fan (Cod. 9120068) or a CP-
710 chest (Cod. 9050041) together with the VE-500
ventilator (Cod. 9050043). A unit working outside its
temperature range (-10 to +45°C) can be damaged beyond
repair. Do not block or cover the supply or cabinet
ventilation slots.
230 V
ENG - 23