Special Applications - GILGEN AS-844 R Instructions De Montage Et D'exploitation

7

Special applications

There are no special applications.
8 Maintenance
Maintenance must be carried out by adequately trained specialists
according to the enclosed service check list 4.06.09.051.4.
The oil level should be controlled periodically using the references
on the dip-stick of the oil filler plug. With medium to low duty cycles
it is sufficient to check it every 2 years. Control it annually with
heavy duty cycles.
The tank can be accessed through the oil filler plug. The oil level
can be controlled visually, and must soak the electric motor's
copper coil (Fig. 16).
Any top ups must be made exclusively with hydraulic oil XD 220.
It is also necessary to check periodically both the correct adjustment
of the mechanical clutch and the efficiency of the electronic anti-
crushing safety system.
Also check the efficiency of the release system.
The safety devices must be checked every six months.
9 Troubleshooting
All troubleshooting interventions must be carried out by the
authorized Gilgen service centers.
10 Disposal
Disassemble the drive unit and the accessories into its individual
parts in order to recycle the different materials.
Warning:
Let off the oil and bring it to the wasge oil collecting
bin.
Appendix
Service check list ................................................... 4.06.09.051.4
Drawing ................................................................... B1-0731-105
Drawing ................................................................... B1-0731-110
Drawing ................................................................... B2-0731-113
Drawing ................................................................... B2-0731-114
Drawing ................................................................... B2-0731-116
4680-999-04_2004.09.p65
E
4680-999/04
AS-844 R
17-29