Maintenance; Meter Maintenance; Disposal - Mettler Toledo SevenEasy S30 Mode D'emploi

10.

Maintenance

10.1

Meter maintenance

There are no user-replaceable parts in the meter or power supply unit. Do not remove the covers.
The SevenEasy conductivity meter needs no maintenance except for an occasional wipe with a damp
cloth. The housing is made of ABS/PC, which is attacked by some organic solvents, such as toluene,
xylene and methyl ethyl ketone. It is good laboratory practice to wipe away any spillage immediately.
Note
To prevent static damage to the instrument, always disconnect the conductivity sensor from the meter
before cleaning the sensor.
10.2

Disposal

In conformance with the European Directive 2002/96/ EC on Waste Electrical and Electronic
Equipment (WEEE) this device may not be disposed of in domestic waste. This also applies
to countries outside the EU, per their specific requirements.
Please dispose of this product in accordance with local regulations at the collecting point
specified for electrical and electronic equipment.
If you have any questions, please contact the responsible authority or the distributor from which you
purchased this device.
Should this device be passed on to other parties (for private or professional use), the content of this
regulation must also be related.
Thank you for your contribution to environmental protection.
METTLER TOLEDO SevenEasy™ conductivity
Maintenance
13