Charging; Fitting The Docking Station - Bosch BSS1POWER Mode D'emploi

Charging

4
14 14

Fitting the docking station

It is recommended that the docking
station is used for charging and sto-
ring the appliance as this takes up
less space.
However, it is also possible to char-
ge and store the appliance without
a docking station.
Fig.
• Fit the docking station close to a
socket.
• To do this, remove the front plate
from the docking station. Insert
your finger into the docking stati-
on from below, and push the front
plate from the inside and out of
the locking mechanism. Use the
screws provided (or equivalent
screws) to mount the docking sta-
tion on the wall.
• Insert the small connector on the
charging cable into the docking
station from below, and then up
and into the preformed recess.
• Put the front plate back on and
lock it in place to secure the con-
nection in place.
• Plug the charging cable's mains
plug into the socket.
1
2
Click
4
en