Charging With A Charging Cable Only - Bosch BSS1POWER Mode D'emploi

Charging
6
1
16 16
Charging
Charging with a charging cable
only
Fig.
• To charge the vacuum cleaner,
place it near to a socket.
• Plug the charging cable into the
connection point at the bottom of
the appliance.
• Plug the charging cable plug into
the socket.
• The vacuum cleaner's status indi-
cator will flash green when it is
charging.
2
• Once the battery is fully charged,
the status indicator will remain
continuously lit green for a few
minutes before going out.
Disconnect the appliance from
the mains briefly to check it. The
indicator will then light up green
again.
• It is normal for the charging cable
and upright vacuum cleaner to be-
come hot and this is not a cause
for concern.
• You can charge the vacuum clea-
ner whenever it is not in use.
6
en