Battery Low; Remaining Battery Charge; Cleaning Reminder; Travel Lock - Philips 9000 Série Mode D'emploi

Note: This appliance can only be used without cord. When you press
the on/off button during or after charging, you hear a sound to
indicate that the shaver is still connected to the wall socket.
Note: When the battery is full, the display switches off automatically
after 30 minutes.

Battery low

When the battery is almost empty, the battery symbol flashes orange
and you hear a sound (Fig. 8).

Remaining battery charge

The remaining battery charge is indicated by the battery charge
percentage shown on the display.

Cleaning reminder

Clean the shaver after every shave for optimal performance.
When you switch off the appliance, the cleaning reminder flashes
to remind you to clean the appliance (Fig. 9).

Travel lock

You can lock the appliance when you are going to travel. The travel
lock prevents the appliance from being switched on by accident.
Activating the travel lock
1 Press the on/off button for 3 seconds to enter the travel lock mode
(Fig. 10).
While you activate the travel lock, the travel lock symbol lights
up white continuously. When the travel lock is activated, the
appliance produces a sound and the travel lock symbol flashes
(Fig. 11).
Deactivating the travel lock
1 Press the on/off button for 3 seconds.
The travel lock symbol flashes and then lights up continuously
(Fig. 11). The appliance is now ready for use again.
Note: You can also deactivate the travel lock by connecting the
appliance to the wall socket.
15
English