Aprimatic VARIA RF Instructions Pour L'installation page 19

12. CENTRALIZED CONTROL - VIA RADIO
The easiest way to control more automatic systems via radio is to store the same remote control in all modules
you wish to operate together.
In this case whether you add a remote control to the system, dedicated to the simultaneous control or you lose
the possibility to control the automations individually. Additionally, the commands transmitted by the dedicated
remote control will not have priority.
A more effi cient way to control more automations simultaneously, using the peculiar characteristics of the modules,
is programming them in order to receive centralized open and centralized close commands. In this way, you
get prioritized centralized commands as well as the possibility to simultaneously control more automations
individually and by group with one remote control.
Example 1: individual or multiple control of two automations with one 4-key remote control.
Select the "step-by-step" logic for both modules and program the remote controls as follows.
Actuator nr 1
Assignments
Local Open .............................. Key 1
Local Close............................... Key 2
Open Centralized.................... Key 3
Close Centralized ................... Key 4
Stop .......................................... n.a.
With these assignments, the transmitter will send the following commands:
VARIA RF 1
Control
Open
Centralized
ENGLISH
Actuator nr 2
Assignments
Local Open .............................. Key 2
Local Close............................... Key 1
Open Centralized.................... Key 3
Close Centralized ................... Key 4
Stop .......................................... n.a.
VARIA RF 2
Control
Close
Centralized
Example 2: individual or multiple control of six automations (M1,M2,..,M6) with one 14-key remote control
(T1,T2,T3,..,T14).
Select the "Semiautomatic Open/Close" logic for all modules and program the remote controls as follows.
Radio signals M1
Local Open T1
Local Close T2
Centralized Open T13
Centralized Close T14
Stop n.a.
With these assignments, the transmitter will send the following commands:
Opening M1
Opening M3
Opening M5
M2 M3 M4 M5
T3 T5 T7 T9
T4 T6 T8 T10
T13 T13 T13 T13
T14 T14 T14 T14
n.a. n.a. n.a. n.a.
Keys - Commands Confi guration
Closing M1 Opening M2 Closing M2
Closing M3 Opening M4 Closing M4
Closing M5 Opening M6 Closing M6
Central. Central.
Opening Closing
M6
T11
T12
T13
T14
n.a.
9 9