Installation; Delivery Packaging - RAIS attika R-600 Notice D'installation

INSTALLATION

The following section explains how to install the fireplace insert
and includes information about the packaging, installation
distances, etc.

DELIVERY PACKAGING

The fireplace insert is supplied secured to a transport pallet
using four transport safety fittings.
The safety fittings are secured with screws and these must be
removed. The safety fitting can then be removed.
There is a polystyrene block in the top of the fireplace insert
which secures the baffle during transport. The polystyrene
block must be removed before starting a fire in the stove.
A
DISPOSAL
RECYCLING OF PACKAGING
The fireplace insert is delivered in packaging that can be recycled.
This packaging must be disposed of in accordance with national
regulations relating to the disposal of waste.
10 - GB
INSTALLATION
A
NB: DISPOSAL OF THE FIREPLACE INSERT AT THE END OF
ITS LIFETIME
The glass cannot be recycled.
The glass must be disposed of along with any ceramics or
porcelain waste. Heat-resistant glass has a higher melting
point and therefore cannot be recycled.
By ensuring heat-resistant glass does not end up alongside
recyclable products you are making an important contribution
to the environment.
A ( 0,5 )
A ( 0,5 )