Firmware Update; Updating The Firmware - Arexx BS-510 Mode D'emploi

5. FIRMWARE UPDATES

Updating the Firmware

The Firmware of a BS-510 Sensors may be reprogrammed by
performing the following steps:
1. Download the most recent Firmware versions at www.arexx.com
2. Unzip the ZIP-file.
3. Start Flash by right-clicking (Right Mouse Button = run as an Admin).
4. This will normally open a DOS-window.
5. Hit "enter" to proceed and Y.
6. The update has been successful as soon as Flash reports "success".
7. Restart the BS-510.
50
E
N
G
L
I
S
H