Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4.2. Problems in the temperature sensor module
The receiver receives signals from sensors, but fails to registrate
signals from one sensor in particular.
Potential problems:
-
Batteries are missing or are at a low charging level
-
Reversed polarity of the sensor's batteries
-
The sensor's location is outside of the receiver's reception range
-
Damage to the sensor (by corroded battery contacts, moisture
or battery leakage)
-
Problems in the radio signal communication
Suggested solutions:
-
Insert fully charged batteries in the sensor and repeat the
communication test (please check the polarisation of the
batteries before inserting!!)
-
Check the battery contacts and remove all corrosion and
moisture effects.
Type:
Radio:
USB:
Supply:
RTC battery:
Internal memory:
Software:
Extra information and possible updates can be found on www.arexx.com
Further questions can also be put on our forum, see www.arexx.com
Technical details
BS-510
ISM 433MHz, Multilogger RF-protocol.
USB 2.0, Multilogger USB-protocol.
5– 7,5V DC / 500mA
CR2032 3V
2MB data-flash, about 9 days for
10 sensors, 18 days for 5 sensors, etc.
http://www.arexx.com
48
E
N
G
L
I
S
H
Publicité
Table des Matières
