Arexx BS-510 Mode D'emploi page 41

Internal real-time clock
The BS-510 module uses an internal clock (RTC) to supply measurement
data with a time-stamp. With the help of a small battery (a button cell type:
CR2032) this clock will also be operating uninterruptedly in a switched-off
module. The clock will be synchronized by the Multilogger software as soon as
a data link has been established.
If the clock restarts – for instance to be caused by an empty button cell
the missing time-stamp prevents the system to record new data.
The error will cause both indicator LEDs to flash simultaneously.
E
The error status may be removed by connecting the module to the PC in order
N
to synchronize the module with the Multilogger software. The software will
synchronize the clocks, which allows the Multilogger process to restart further
G
logging.
L
It is easy to replace the button cell battery. The button cell can be found at the
printed circuit board, which is made accessible by opening both halves of the
I
BS-510 compartment.
S
H
SOFTWARE
The Multilogger software (Templogger software) has been designed for
Windows (and also for subsequent Windows versions) and is available for 32
bits and 64 bits systems. The software has been equipped with 4 languages.
You can download the most recent software versions from:
http://www.arexx.com.
The software package for the logger application also includes the USB-driver,
the messenger and a great number of extra tools.
The website also provides users with detailed information to the Multilogger
series of products.
If you are unable to receive any sensor data:
CHECK
• if you have the latest Software and Fimware
• Please check the "active"-box for the sensor filter list and deactivate the
sensor filter list altogether.
41