Lindy HDMI 4x1 Multi-View Switch Manuel Utilisateur page 4

User Manual
Overview
1. HDMI OUT: For connection to a HDMI display
2. HDMI IN1-4: For connection of HDMI source equipment
3. DC12V: For connection of the supplied 12VDC power supply
4. POWER: LED Power indicator
5. AUDIO: Audio mode switch
6. VIDEO: Video mode switch
7. IR: IR receiver
IR Remote
Button Operation
IN1/2/3/4 Directly switch from any display mode to input 1-4 in
standard/full screen mode
◄ / ►
Cycle through the connected inputs in standard/full
screen mode
Audio Switch the audio independently from the video signal,
each press cycles to the next input.
Toggles audio on/off in standard full screen mode
Mode Cycle though the viewing modes
Quadview Directly switch to the quadview viewing mode
720p/1080p Switch between output scaling modes
Installation
We recommend the use of good quality cables with this product, especially when using longer lengths.
▪
Connect your HDMI source devices using good quality cables of up to 15m in length.
▪
Connect your HDMI display/projector using a good quality cable of up to 15m in length.
▪
Connect the supplied 12V power supply, power on your devices and select the relevant input on the
HDMI display.
▪
The HDMI output of all sources is now shown directly on the screen in a Quad View layout.
English