Bimar HC507 Mode D'emploi page 15

-▲ button increases the value (temperature or time) of the period (days) when making
changes to its functions. It also activates the open window detector.
-▼ button decreases the value (temperature or time) of the period (days) when
making changes to its functions. It also deactivates the open window detector.
- M button selects normal or weekly mode.
The appliance can be used according to the following modes and functions:
- Normal mode: the appliance is turned on and off manually. The ambient
temperature must be set.Control as follows:
- plug into the socket.
- set the 0/I switch to I.
-press to turn the appliance on.
-press SET and thereafter ▲ or ▼ to increase or decrease the ambient temperature
which can be read on the display and flashes while being adjusted. Press SET again to
confirm the temperature and it will stop flashing. If the value set is greater than the
ambient temperature, the appliance switches on and once the set temperature is
reached it turns off. It will then turn on again when the temperature drops.
- to stop the appliance press
completely, set the 0/I switch to 0
- Weekly programme mode: the appliance goes on and off automatically according to
the programme that has been set for one period of time each day of the week. The
days appear on the display as: MO=Monday. TU=Tuesday. WE= Wednesday.
TH=Thursday. FR= Friday. SA=Saturday. SU= Sunday.
Set as follows:
- plug into the socket.
- set the 0/I switch to I.
-press to turn the appliance on.
-Set the local time (Hour/Minutes/Day): press SET for about 3 seconds (you will hear a
"beep" and will appear on the display). The hour will flash, press ▲ or ▼ to
increase or decrease it and then press SET to confirm. Thereafter set the minutes,
which will be flashing and press ▲or▼ to increase or decrease and then press SET to
confirm. Set the day by pressing ▲ or ▼ until the right day is reached, and then press
SET to confirm.
-Press M to set the weekly programme (it will come on only if the local time is set),
and press again to select the required day. Press SET to adjust the temperature (its
value will be flashing) and ▲ or ▼to increase or decrease it. Press SET to confirm.
"ON" and the start time will flash simultaneously and the time is adjusted by using ▲
or ▼ to increase or decrease it. Press SET to confirm and then adjust the minutes
using ▲ or ▼, thereafter pressing SET to confirm. "OFF" and the switch-off time will
flash simultaneously and the time is adjusted by using ▲ or▼ to increase or decrease
it. Press SET to confirm and thereafter set the minutes using ▲ or ▼. Press SET to
confirm. The temperature and functions for each of the other days of the week are set
in the same way.
: it goes into stand-by mode. To turn it off
15