Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION MANUAL AND COMMISSIONING GUIDE FOR THE
PACK CONTENTS:
A. Opaque tube for connecting the output from the pump
to the point of injection
B. Transparent tube for connecting the bleeder valve for
manual priming
C. Injection fitting
D. Tube connection kit
E. Foot filter
F. Wall fixing bracket
G. Anchor bolts for fixing the wall bracket
H. Pump body screws protection caps
I.
Instruction Manual
FOR SPECIFIC HYDRAULIC FEATURES SEE THE LABEL ON THE PUMP
INTRODUCTION
The dosing pump consists of a control section containing the electronics and the magnet, and a hydraulic section, which
is always in contact with the liquid to be dosed.
Check the main specifications of your pump on the data plate
t is advisable to check the chemical compatibility between the product to be dosed and the materials with
I
which it will come into contact.
MATERIALS USED TO MAKE THE HEAD OF THE PUMP
•
Casing:
•
Valve:
•
Balls:
•
Membrane:
TECHNICAL SPECIFICATIONS
•
Weight:
•
Power supply:
•
Power consumption: 12 W
•
Fuse:
•
Protection class:
EM00136493
KOMPACT SERIES DOSING PUMPS
PVDF-T
PVDF-T
Ceramic
PTFE
1,5 Kg
110 ÷ 230 Vac (50-60 Hz)
2A 250V T 5x20
IP65
rev. 1.0 EN
C
B
A
F
E
G
1 Control panel
2 Dosing head
3 Valve for priming the pump
4 Delivery connection
5 Suction connection
6 Support for base-plate (optional)
D
I
H
1
Publicité
Table des Matières
