CTX 70692 Manuel D'installation page 13

Paragraph 9 – Password
Programming
Paragraph 10 – Flow Alarm
Programming
Paragraph 11 – Level Alarm
Programming
EM00136493
By setting the password, the programming section can be
accessed to view all the setup parameters, but every time
you try to change the settings you will be prompted for the
password.
The flashing line indicates the editable number; press
to select the number (from 1 to 9), then press
the number to modify, and then press
By setting "0000" (default), the password will be eliminated.
Allows you to activate (deactivate) the flow sensor.
Once activated (On) by pressing the
the number of signals the pump requires before starting the
alarm. Press
to set the value. Press
to return to the main menu.
Allows you to set the pump for the level alarm activation,
with dosage operation interruption (Stop), or simple
activation of the alarm signal without dosage operation
interruption.
Press to access the item then press
alarm type. Press
the main menu.
rev. 1.0 EN
Operation
Operation
and the number will start to flash; press
to confirm. Press
Operation
to confirm. Press
to select
to confirm.
key, you can set
to set the
to return to
11