CTX 70692 Manuel D'installation page 17

Alarms
Dislay
Alarm LED on
"Lev" icon flashing
Alarm LED on
"Lev" and "Stop" icons flashing
Alarm LED on
"Flw" icon flashing
"OFA" icon flashing
"Stop" icon flashing
"Alm" icon flashing
"Cal" icon flashing
EM00136493
Cause
End level alarm, without pump
operation interruption.
End level alarm,
operation interruption.
Flow alarm activated, the pump has
not received from the flow sensor
the programmed number of signals.
O.F.A. alarm
The value read by the probe is out
of the alarm band set
Probe not calibrated alarm
rev. 1.0 EN
Restore the liquid level.
with pump Restore the liquid level.
Press the
Press the
flashing of the "Stop" icon, press
the key again to restart the pump.
Check the "Alarm Band" parameter
for the
programming mode.
Perform
procedure.
Remedy
key.
key to stop the
correct settings
the probe calibration
in
15