P4.0: Entering The Absolute Pressure (Wöhler Fa 430 Only) - Wohler FA 410 Mode D'emploi

6.4 P4.0: Entering the absolute pressure (Wöhler FA 430 only).
When measuring at high altitudes, take the pressure into consideration to obtain a pre-
cise CO reading. Before beginning to take measurements at high altitudes, enter the
2
absolute pressure of your location .
Fig. 17: Entering the absolute pressure

In the P4.0 mode, press the HOLD/MIN/MAX
key to access the Absolute pressure setting
mode.
The preset absolute pressure is displayed in hec-
topascal (1013 hPa).

Using the Up and Down keys, set the absolute
pressure of the location where you are taking
measurements.

To return to the P4.0 mode after completing
the setting, press the HOLD/MIN/MAX key.
Settings
EN
55