Electrical Connection - IFM Electronic efector190 DTA100 Notice D'utilisation

/
READ WRITE HEAD FOR RF IDENTICFICATION SYSTEMS

6. Electrical connection

Connect the read/write head to the AS-i network using the M12 connector.
Voltage is supplied via the AS-i network.
You can find a selection of sockets on our website at:
www.ifm-electronic.com
Adhere to the distance between the AS-i cable and the housing of the read/write
head.
A = 100 mm
14
Data sheet direct
1 BN
ASI+
3 BU
ASI
DTA100
DTA100 Accessories
core colours of ifm sockets:
1 = BN (brown)
3 = BU (blue)
clear space read/write head ↔ cable
wiring