Roger Beep On/Off; Headset Connection; Technical Specifications; Warranty Period - Topcom TWINTALKER 1302 Manuel D'utilisateur

14.11 ROGER BEEP ON/OFF

After the - button is released, the unit will send out a roger beep to confirm that you have stopped talking.
PTT
To set the Roger Beep.
• Press
SC
• Press
• Press
TX RX
PTT

14.12 HEADSET CONNECTION

The Twintalker 1302 can be used with an external microphone and speaker .
The connector is located under the protective rubber cover on the top of the unit.To attach the
external speaker/microphone headsets or earpiece, lift the rubber flap on the top of the unit to
expose the connector.
Insert the appropriate plug into the connector.
15

TECHNICAL SPECIFICATIONS

Channels
Frequency
Range
Batteries PMR
Transmission Power
Modulation Type
Channel spacing
16 WARRANTY

16.1 WARRANTY PERIOD

Topcom units have a 24-month warranty period. The warranty period starts on the day the new unit is purchased.
Consumables or defects causing a negligible effect on operation or value of the equipment are not covered.
The warranty has to be proven by presentation of a copy of the original purchase receipt, on which the date of purchase
and the unit-model are indicated.

16.2 WARRANTY EXCLUSIONS

Damage or defects caused by incorrect treatment or operation and damage resulting from use of non-original parts or
accessories are not covered by the warranty.
The warranty does not cover damage caused by outside factors, such as lightning, water and fire, nor any damage
caused during transportation.
No warranty can be claimed if the serial number on the unit has been changed, removed or rendered illegal.
TOPCOM TWINTALKER 1302 DUO COMBI PACK
4 times. 'ro' will be displayed.
to enable (ON) or disable the Roger-Beep (OF).
to confirm your selection and return to the standby mode.
TOPCOM TWINTALKER 1302 DUO COMBI PACK
8
446.00625MHz - 446.09375 MHz
Up to 5 km (Open field)
3 x AAA NiMh rechargeable
=< 500mW ERP
FM - F3E
12,5 Khz
9