Fein GRIT GIC Série Mode D'emploi page 10

OBJ_BUCH-0000000333-001.book Page 10 Friday, September 28, 2018 12:34 PM
en
10
Repair and customer service.
Before any work on the machine itself, pull the
mains plug.
Repairs may be carried out only by qualified per-
sons in conformity with the valid regulations.
For repairs, we recommend our FEIN customer service
centre, the FEIN authorised service centres and FEIN
agencies.
When the machine's power supply cable is damaged, it
must be replaced using a specially prepared power supply
cable, available from your FEIN customer service agent.
The current spare parts list of this machine can be found
on the Internet under www.fein.com.
Daily maintenance
Empty the coolant tank. Separate and dispose of coolant
and metal dust.
Clean the basin (15). If required, remove any clogs in the
drain system.
Cleaning the exterior of the machine with compressed
air.
Warranty and liability.
The warranty for the product is valid in accordance with
the legal regulations in the country where it is marketed.
In addition, FEIN also provides a guarantee in accordance
with the FEIN manufacturer's warranty declaration.
The delivery scope of your machine may include only a
part of the accessories described or shown in this instruc-
tion manual.
Environmental protection, disposal.
Packaging, worn out machines and accessories should be
sorted for environment-friendly recycling.
Connection diagrams.
Type GIC 440/254 V, 400/230 V
Type GIC 230 V, 220 V
Type GIC 575 V/332 V
Type GXW 440/254 V, 400/230 V
Type GXW 230 V, 220 V
Type GXW 575 V/332 V
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26