OPERATION OF THE EXTRACTOR UNIT
Manually switch on the extractor unit
1. Switch on the hob.
2. Touch the extraction key.
The display of the extractor unit lights up.
▷
3. Set the extractor speed level within 3 seconds by touching the slide control (1 to 9).
▷
The extractor unit switches on with the extraction speed that is set.
Set a higher or lower level with the slide control.
▷
Boost
1. Switch on the hob and set a power level (>2).
2. Touch the 'Automatic extraction mode' key to switch off the automatic extraction mode.
3. Touch the extraction key.
The display of the extractor unit lights up.
▷
4. Touch level 9 to select 'Boost'.
▷
The extractor unit switches on at speed level 9.
'9' shows on the display.
▷
EN 23