Inserting/Replacing The Battery - Parkside PWM 4 A1 Mode D'emploi

Inserting/replacing the battery

The appliance is delivered and operated with a 3.0 V battery, type CR 2032
♦ Disconnect the appliance from the water connection.
♦ Turn the battery compartment cover
♦ If necessary, remove the empty battery.
♦ Insert a 3.0 V battery, type CR 2032
that the polarity is correct (see fig. 1).
♦ Place the battery compartment cover
facing upwards. Make sure that the small recess fits onto the battery compartment. Turn
the battery compartment cover
shown on the type plate (see fig. 2).
Fig. 1
NOTE
► If the battery is low, the battery change indicator
replaced as soon as possible.
► When the battery is changed, all memory functions are automatically reset to 0.
│ GB │ IE
■ 24
in the direction of the arrow and remove it.
into the battery compartment cover
on the battery compartment with the large recess
as far as it will go in the opposite direction to the arrow
Fig. 2
appears. The battery should be
.
. Make sure
PWM 4 A1