Amana MVH250E Manuel De L'utilisateur page 40

Installation
STEP 3: PREPARE THE VENTING BLOWER
exhaust
Figure 15
ROOM-VENTED (Recirculating)
INSTALLATION:
1. Remove one blower unit mounting screw and two blower
plate screws. Remove the blower plate from cabinet. See
Figure 17.
2. Carefully lift the blower unit out of the microwave oven.
3. Rotate blower unit 90û so the exhaust ports face the front of
the cabinet. See Figure 18.
4. Place the blower unit back into the microwave oven.
5. Reattach blower plate to microwave oven. Attach with one
blower unit mounting screw and then two blower plate
mounting screws. See Figure 19.
ports
blower
unit
Figure 18
blower unit
exhaust ports
Figure 16
blower
unit
- 40 -
blower plate
mounting
screws
blower unit
mounting screw
blower plate
mounting screws
blower unit
mounting screw
Figure 17
blower plate
mounting screws
blower unit
mounting screw
Figure 19