Step 1: Prepare The Electrical Connections - Amana MVH250E Manuel De L'utilisateur

Installation

STEP 1: PREPARE THE ELECTRICAL CONNECTIONS

AVOID ELECTRICAL SHOCK! THIS APPLIANCE MUST BE GROUNDED! AVOID ELECTRICAL SHOCK! THIS APPLIANCE MUST BE GROUNDED!
¥
DO NOT, UNDER ANY CIRCUMSTANCES, REMOVE THE POWER SUPPLY CORD
GROUNDING PRONG!
This appliance MUST be grounded!
1. Locate the grounded electric outlet for this oven in the cabinet
above the oven, as shown in Figure 4.
NOTE: The outlet should be on a circuit dedicated to the
microwave oven (120V, 60Hz., AC only) with a
15 or 20A fused electrical supply.
IMPORTANT: If you do not have the proper wall outlet, you MUST
have one installed by a qualified electrician.
2. You will cut the power-supply-cord hole (shown in
Figure 4) later when you prepare the wall and upper cabinet in
Step 4.
NOTE: Do not use an extension cord.
Keep the power cord dry and do not pinch or crush it.
WARNING - FIRE HAZARD WARNING
Improper grounding could result in Improper grounding could result in
electric shock or other personal injury. electric shock or other personal injury.
- 36 -
Upper
Cabinet
Grounded Outlet
( Inside Cabinet )
Power-Supply-Cord Hole
Figure 4